Cisco Cisco Aironet 3600i Access Point Guía De Instalación
4
4
Unpacking
To unpack the access point, follow these steps:
Step 1
Unpack and remove the access point and the accessory kit from the shipping box.
Step 2
Return any packing material to the shipping container and save it for future use.
Step 3
Verify that you have received the items listed below. If any item is missing or damaged, contact your Cisco representative
or reseller for instructions.
or reseller for instructions.
–
The access point
–
Mounting bracket (selected when you ordered the access point)
–
Adjustable ceiling-rail clip (selected when you ordered the access point)
5
Configurations
The 3600 series access point contains two simultaneous dual-band radios, the 2.4-GHz and 5-GHz 802.11n MIMO radios. The
3600 series access point’s configurations are:
3600 series access point’s configurations are:
•
AIR-CAP3602E-x-K9, AIR-AP3602E-UXK9—two 2.4-GHz/5-GHz dual-band radios, up to 4 external dual-band diopole
antennas
antennas
•
AIR-CAP3602I-x-K9, AIR-AP3602I-UXK9—two 2.4-GHz/5-GHz dual-band radios, with integrated dual-band inverted-F
antennas
antennas
For information on the regulatory domains, see
External Antennas
The 3602E model is configured with up to four external dual-band dipole antennas, and two 2.4-GHz/ 5-GHz dual-band radios.
The radio and antennas support frequency bands 2400–2500 MHz and 5150–5850 MHz through a common dual-band RF
interface. Features of the external dual-band dipole antennas are:
The radio and antennas support frequency bands 2400–2500 MHz and 5150–5850 MHz through a common dual-band RF
interface. Features of the external dual-band dipole antennas are:
•
Four RTNC antenna connectors on the top of the access point
•
Four TX/RX antennas
These antennas are supported on the 3602E:
•
AIR-ANT2524DB-R
•
AIR-ANT2524DW-R
•
AIR-ANT2524DG-R
•
AIR-ANT2524V4C-R
•
AIR-ANT2544V4M-R
•
AIR-ANT2566P4W-R
Internal Antennas
The 3602I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band
radios.
radios.
There are four antennas deployed inside the access point with one deployed on each corner of the 3602I access point top
housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:
housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:
•
Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.
•
Antenna unit integrated into the 3602I model access point.
•
Peak gain is approximately 2 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz band.