Cisco Cisco Aironet 1810w Access Point Guía De Instalación
3
1
About this Guide
This guide provides instructions on how to install and configure your Cisco Aironet 1810W series
access points. This guide also provides mounting instructions and limited troubleshooting procedures.
access points. This guide also provides mounting instructions and limited troubleshooting procedures.
The Aironet 1810W series access point is abbreviated as AP in this document.
2
About the Access Point
The Cisco Aironet 1810W series access point is an 802.11 a/b/g/n/ac (Wave 2) access point, with
internal antennas.
internal antennas.
The Cisco Aironet 1810W has multiple mounting options to standard junction boxes. The AP can be
vertically mounted on a wall or on a desk/horizontal surface using the optional cradle kit. Physical
security is offered with the included Torx screw and the option to add a Kensington lock.
vertically mounted on a wall or on a desk/horizontal surface using the optional cradle kit. Physical
security is offered with the included Torx screw and the option to add a Kensington lock.
The AP supports 2.4 GHz 2x2 802.11 b/g/n MU-MIMO and 5 GHz 2x2 802.11 a/n/ac (Wave 2)
MU-MIMO applications simultaneously.
MU-MIMO applications simultaneously.
Access Point Features
The features of the 1810W series access points are:
•
Supported mode(s) of operation:
–
Centralized
•
Radio features supported are:
–
2.4 GHz and 5 GHz concurrent radios
–
2.4GHz radio with 2TX x 2RX and 2 spatial steams
–
5GHz radio with 2TX x 2RX and 2 spatial steams
–
802.11ac based Transmit Beamforming
–
Quality of Service (QoS)
–
Radio Resource Management (RRM)
–
Rogue Detection
–
BandSelect
–
Integrated Bluetooth LE 4.1 radio for location and asset tracking.