Cisco Cisco Aironet 3700p Access Point Guía De Instalación

Cisco recommends that you make a site map showing access point locations so that you can record the 
device MAC addresses from each location and return them to the person who is planning or managing 
your wireless network.

Installing the access point involves these operations:

Performing a pre-installation configuration (optional)

Mounting the access point

Grounding the access point

Deploying the access point on the wireless network

The following procedures ensure that your access point installation and initial operation go as 
expected. A pre-installation configuration is also known as priming the access point. This procedure 
is optional.

Performing a pre-installation configuration is an optional procedure. If your network 
controller is properly configured, you can install your access point in its final location and 
connect it to the network from there. See the 

 for details.

The pre-installation configuration setup is shown in