Cisco Cisco Aironet 3700i Access Point Hoja De Datos
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Item
Specification
● Provides full-spectrum scanning for comprehensive detection and mitigation of over-the-network attacks, Cisco
CleanAir technology to detect devices causing network interference, rogue device detection, context (location)
awareness, FastLocate, and radio resource management (RRM) solutions
awareness, FastLocate, and radio resource management (RRM) solutions
● FastLocate provides faster updates per Wi-Fi device for a quicker refresh of the device’s location
● Provides full scanning of all 2.4- and 5-GHz channels while the access point is serving data clients on the integrated
● Provides full scanning of all 2.4- and 5-GHz channels while the access point is serving data clients on the integrated
radios (802.11b/g/n and 802.11a/n)
Dual-band, switchable multimode module, first band for LTE with 2x50 mw MIMO, one
band for 3G with 100 mw transmit and receive diversity
● Software configurable to operate as UMTS and LTE. Band 1/3 (USC8718-M13-K9)
● Software configurable to operate as UMTS and LTE. Band 1/7 (USC8718-M17-K9)
● Software configurable to operate as UMTS and LTE. Band 2/4 (USC8718-M24-K9)
● Software configurable to operate as UMTS and LTE. Band 1/7 (USC8718-M17-K9)
● Software configurable to operate as UMTS and LTE. Band 2/4 (USC8718-M24-K9)
● 3GPP band 1 (2100 MHz), 16 users, voice (R99), packet data (HSPA/HSDPA+)
● 3GPP band 2/5 (band 2 - 1930 and band 5 - 869), 16 users, voice (R99), packet data (HSPA/HSDPA+)
● 3GPP band 2/5 (band 2 - 1930 and band 5 - 869), 16 users, voice (R99), packet data (HSPA/HSDPA+)
802.11n version 2.0
(and related)
capabilities
(and related)
capabilities
● 4x4 MIMO with three spatial streams
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
802.11ac Wave 1
capabilities
capabilities
● 4x4 MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
Data rates supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz:
MCS Index
2
GI
3
= 800 ns
GI = 400 ns
20-MHz Rate (Mbps)
20-MHz Rate (Mbps)
0
6.5
7.2
1
13
14.4
2
19.5
21.7
3
26
28.9
4
39
43.3
5
52
57.8
6
58.5
65
7
65
72.2
8
13
14.4
9
26
28.9
10
39
43.3
11
52
57.8
2
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the
coding rate, and data rate values.
3
GI: A guard interval (GI) between symbols helps receivers overcome the effects of multipath delay spreads.