Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Guía De Instalación

Thank you for choosing the Cisco 200E series Advanced Smart Switch, a 
Cisco Small Business network communications device. This device is 
designed to be operational right out of the box as a standard bridge. In the 
default configuration, it will forward packets between connecting devices 
after power up. 

• Cisco SF200E-24/P or SF200E-48/P Advanced Smart Switch

• Rackmount Kit

• Power Cord or Power Adapter

• This Quick Start Guide

• Product CD 

• Serial Cable

• Rubber Feet

This guide will familiarize you with the layout of the advanced smart switch 
and describe how to deploy the device in your network. For additional 
information, see 

.

There are two ways to physically install the switch:

• Set the switch on a flat surface.

• Mount the switch in a standard rack (1 rack unit high). 

Do not deploy the device in a location where any of the following 
conditions exist:

High Ambient Temperature—The ambient temperature must not 
exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Reduced Air Flow—Both side panels must be unobstructed to prevent 
overheating.

Mechanical Overloading—The device should be level, stable, and 
secure to prevent it from sliding or shifting out of position.

Circuit Overloading—Adding the device to the power outlet must not 
overload that circuit.