Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
Address Table Commands
410
78-20269-01 Command Line Interface Reference Guide
28
•
port-channel port-channel-list
—Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces; use a hyphen
to designate a range of port channels.
to designate a range of port channels.
Default Configuration
Ports are not forbidden to dynamically join Multicast groups.
The default option is add.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Use this command to forbid a port to dynamically join (by IGMP, for example) a
Multicast group.
Multicast group.
The port can still be a Multicast router port.
Example
The following example forbids forwarding of all Multicast packets to gi1 within
VLAN 2.
VLAN 2.
switchxxxxxx(config)#
interface vlan
2
switchxxxxxx(config-if)#
bridge multicast forbidden forward-all add ethernet
gi
1
28.17 bridge unicast unknown
Use the bridge unicast unknown Interface Configuration mode command to
enable egress filtering of Unicast packets where the destination MAC address is
unknown to the device. Use the no form of this command to restore the default
configuration.
enable egress filtering of Unicast packets where the destination MAC address is
unknown to the device. Use the no form of this command to restore the default
configuration.
Syntax
bridge unicast unknown {
filtering
|
forwarding
}
no bridge unicast unknown