Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manual De Mantenimiento

Green Ethernet

Cisco Small Business SF200E Series Advanced Smart Switch

109

 

To configure global Green Ethernet properties:

Click Port Management > Green Ethernet > Properties in the navigation window.

By default, Energy Detect mode is enabled globally and on all ports.

If not already enabled, select Energy Detect Mode to enable this feature on the 
switch. The switch automatically enters the low-power mode when energy on the 
line is lost, and it resumes normal operation when energy is detected. 

Click Apply. Your changes are saved to the Running Configuration.

Use the Green Ethernet Port Settings page to view and configure Energy Detect 
settings on individual ports. 

Energy Detect port settings are overridden if the global settings are subsequently 
changed (see 

To configure Green Ethernet port settings:

Click Port Management > Green Ethernet > Port Settings in the navigation 
window.

The Settings page displays the following Energy Detect fields for each port:

•

Admin—Indicates whether Energy Detect is enabled on the port.

•

Operational—Indicates whether Energy Detect mode is currently 
operational (“Enabled”) on the port. 

•

Reason—Indicates why the operational status is enabled or disabled.

The following reason may display when the Energy Detect operational status 
is Enabled.

-

No Energy Detected—No energy is detected on the link.

The following reasons might display when the Energy Detect operational 
status is Disabled.

-

Fiber—The administrative status might be active but the port is 
functioning in fiber mode. (Green Ethernet functionality applies only to 
copper ports.)