Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manual De Mantenimiento

Management Access Profile Rules

Cisco Small Business SF200E Series Advanced Smart Switch

162

 

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

Use the Management Access Profile Rules page to define a profile and rules for 
accessing the device for management purposes. Management access can be 
separately defined for each type of access method, including, web (HTTP), Telnet, 
Secure Telnet (SSH), and SNMP. 

You can limit access to specific user names, ingress ports or LAGs, and source IP 
addresses.

To display this page, click Security > Management Access Profile Rules in the 
navigation window.

The Access Profile Table lists the profile name of the currently configured profile, if 
one exists. The Profile Rule Table shows the existing rules for the profile. By 
default, no access profiles and rules are configured on the switch. You can create 
and enable only one profile and all the rules you create are assigned to that profile.

To create an access profile and assign rules to it:

In the Access Profile Table, click Add.

Specify the Access Profile Name and select Enable.

Click Apply and then click Close.

The new profile appears in the Access Profile Table. Next, add the rules to the 
profile.

In the Profile Rule table, click Add.

Specify any of the following parameters to restrict or allow access: