Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Instalación
Cable Management System Installation
Removing Cable Guides ▀
ASR 5500 Installation Guide ▄
179
Removing Cable Guides
To gain additional space for accessing the hook-and-loop straps in the cable tray, you may remove the middle cable
guides from the left and right side of the tray.
guides from the left and right side of the tray.
You will need a Phillips #1 screwdriver for this procedure.
To remove a cable guide:
Step 1
Locate the middle guide in the group of three as shown in the figure below.
Step 2
Insert the screwdriver in the top slot of the cable guide.
Step 3
Turn the screw that secures the guide to the back of the tray counterclockwise until it drops free of the guide.
Step 4
Insert the screwdriver in the bottom slot of the guide.
Step 5
Turn the screw that secures the guide to the back of the tray counterclockwise until it drops free of the guide.
Step 6
Remove the guide.
Step 7
Locate and remove the screws and washers.
Step 8
Repeat Step 1 through Step 7 for the middle guide of the other group of three guides.
Step 9
Removing Cable Guides
1
Cable management tray
2
Cable guide
3
Phillips #1 screwdriver