Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Instalación
MIO Port Cabling
▀ 10 GbE Optical Daughter Card Ports
▄ ASR 5500 Installation Guide
84
10 GbE Optical Daughter Card Ports
Caution:
The 10 Gigabit Ethernet ports on the daughter cards are only certified to work with SFP+ transceivers
tested and approved by Cisco. MIO and UMIO cards ship with SFP+ transceivers installed.
The 10 Gigabit Ethernet ports accept the following fiber optic to electrical signal Small Form-Factor Pluggable (SFP+)
transceiver types:
transceiver types:
10GBase-SR – connects the port to a multi-mode fiber optic cable over relatively short distances (30.80 meters).
10GBase-LR – connects the port to a single-mode fiber optic cable over a maximum distance of 10km.
The table below lists the signaling parameters supported for the above transceiver types.
Table 13. SFP+ Transceiver Parameters
SFP+ Transceiver Type
Parameter
Value
10GBase-SR
Maximum transmit level
-1.0dBm
Minimum transmit level
-7.3dBm
Maximum receive level
-1.0 dBm (saturation average power)
Minimum receive level
-11.1 (sensitivity average power)
10GBase-LR
Maximum transmit level
0.5 dBm
Minimum transmit level
-8.2 dBm
Maximum receive level
0.5 dBm (saturation average power)
Minimum receive level
-12.6 (sensitivity average power)