Cisco Cisco Packet Data Gateway (PDG) Documentation Roadmaps
ST16 Hardware Platform Overview
▀ ST16 Chassis Descriptions
▄ Cisco ASR 5000 Series Product Overview
OL-22937-01
ST16 Chassis Descriptions
Slot Numbering
ST16 chassis features a 48-slot design with 16 front-loading slots for application cards and 32 rear-loading slots (16
upper and 16 lower) for line cards.
upper and 16 lower) for line cards.
Figure 12. Front Slot Numbering Scheme for Application Cards
../../../GRAPHICS/Production/ST-series_Hardware/2D_chassis_front.wmf
The rear of the chassis features a half-slot design that supports up to 32 line cards:
Figure 13. Rear Slot Numbering Scheme for Line Cards
../../../GRAPHICS/Production/ST-series_Hardware/2D_Chassis_Back.wmf
The following table shows the front slot numbers and their corresponding rear slot numbers.
Table 5. Front and Rear Slot Numbering Relationship
Position
Slot Number
Front
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Rear Top Slots
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
Rear Bottom
Slots
Slots
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
Rear Slot Numbering for Line Cards
Rear-installed line cards must be installed directly behind their respective front-loaded application card. For example, an
application card in Slot 1 must have a corresponding line card in Slot 17. The redundant line card for this configuration
would be placed in Slot 33. This establishes a directly mapped communication path through the chassis midplane
between the application and line cards.
application card in Slot 1 must have a corresponding line card in Slot 17. The redundant line card for this configuration
would be placed in Slot 33. This establishes a directly mapped communication path through the chassis midplane
between the application and line cards.
To help identify which rear slot corresponds with the front-loaded application card, note that the upper rear slot numbers
are equal to the slot number of the front-loaded card plus 16. For example, to insert a line card to support an application
card installed in slot 1, add 16 to the slot number of the front-loaded application card (Slot 1 + 16 slots = Slot 17). Slot
17 is the upper right-most slot on the rear of the chassis, directly behind Slot 1.
are equal to the slot number of the front-loaded card plus 16. For example, to insert a line card to support an application
card installed in slot 1, add 16 to the slot number of the front-loaded application card (Slot 1 + 16 slots = Slot 17). Slot
17 is the upper right-most slot on the rear of the chassis, directly behind Slot 1.
For lower rear slot numbers, add 32. Again, a redundant line card for an application card in Slot 1 would be (Slot 1 + 32
= Slot 33). Slot 33 is the lower right-most slot on the rear of the chassis, also behind Slot 1.
= Slot 33). Slot 33 is the lower right-most slot on the rear of the chassis, also behind Slot 1.