Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Context Configuration Mode Commands
lac-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
lac-service
Enters the lac-service configuration mode, or is used to add or remove a specified LAC service.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the specified lac-service from the current context.
Specifies the name of a LAC service to configure, add, or remove. It can be from 1 to 63 alpha and/or
numeric characters in length and is case-sensitive.
numeric characters in length and is case-sensitive.
Usage
Enter the LAC service configuration mode for an existing service or for a newly defined service. This
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a large
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Example
To add a new LAC service named LAC1and enter the lac-service configuration mode, enter the following commands:
To add a new LAC service named LAC1and enter the lac-service configuration mode, enter the following commands:
To configure an existing LAC service named LAC2, enter the following command:
To delete an existing LAC service named LAC3, enter the following command: