Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Context Configuration Mode Commands
▀ threshold available-ip-pool-group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Method
Description
Context-level
A single IP pool utilization threshold can be configured for all IP pool groups within a given system context. If a
single threshold is configured for all pool groups, separate alerts or alarms can be generated for each group.
This command configures that threshold.
single threshold is configured for all pool groups, separate alerts or alarms can be generated for each group.
This command configures that threshold.
IP address
pool-level
pool-level
Each individual IP address pool can be configured with its own threshold. Thresholds configured for individual
pools take precedence over the context-level threshold that would otherwise be applied (if configured).
In the event that two IP address pools belonging to the same pool group are configured with different thresholds,
the system uses the pool configuration that has the greatest low threshold for that group.
pools take precedence over the context-level threshold that would otherwise be applied (if configured).
In the event that two IP address pools belonging to the same pool group are configured with different thresholds,
the system uses the pool configuration that has the greatest low threshold for that group.
Example
The following command configures a context-level IP pool utilization low threshold percentage of 10 and a high
threshold of 35 for an system using the Alarm thresholding model:
The following command configures a context-level IP pool utilization low threshold percentage of 10 and a high
threshold of 35 for an system using the Alarm thresholding model: