Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
CSCF Policy Rules Configuration Mode Commands
qos ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
qos
Configures QoS bandwidth settings for uplink and downlink.
Product
SCM
Privilege
Administrator
Syntax
downlink: Configures the downlink bandwidth.
uplink: Configures the uplink bandwidth.
uplink: Configures the uplink bandwidth.
Peak value of bandwidth in kilobits per second (kbit/s).
must be an integer from 1 to 99999999.
Usage
The P-CSCF/A-BG fills the required bandwidth for downlink and uplink from the Session Description
Protocol (SDP) in the message when communicating with an external policy server via Rx/Tx/Gq. Use this
command to configure the peak uplink and downlink bandwidth to be used when the SDP does not contain
bandwidth.
Protocol (SDP) in the message when communicating with an external policy server via Rx/Tx/Gq. Use this
command to configure the peak uplink and downlink bandwidth to be used when the SDP does not contain
bandwidth.
Example
Set the peak uplink bandwidth to
Set the peak uplink bandwidth to
kbit/s: