Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Exec Mode Commands (A-C)
card psc upgrade ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
card psc upgrade
This command upgrades the programmables on the PSC card.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Upgrades programmables on the specified card. Must be followed by a slot number of card to upgrade.
Caution:
This command should only be used if instructed by or working with Technical Support.
Usage
You can only initiate an upgrade if:
there is no migration occurring
the card is active or standby
there is no online upgrade in progress
Important:
The following operations are not allowed while a card is upgrading: change pac edc requirement
(config) change card [no] shutdown (config) change card active (config) change card redundancy (config) card halt
(exec) card reboot (exec) start an online upgrade
(exec) card reboot (exec) start an online upgrade
Important:
Level unlock operations are ignored while a card is upgrading.
Important:
This command is not supported on all platforms.
Example
The following command initiates a PSC upgrade:
The following command initiates a PSC upgrade: