Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
IPv6 ACL Configuration Mode Commands
redirect css service (for uplink, by IP packets) ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
The IP address(es) to which the packet is to be sent.
This option is used to filter all packets to a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this parameter. The range can
then be configured using the
This option is used to filter all packets to a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this parameter. The range can
then be configured using the
parameter.
This option is used in conjunction with the
option to specify a group of addresses for which
packets are to be filtered.
The mask must be entered as a complement:
The mask must be entered as a complement:
Zero-bits in this parameter mean that the corresponding bits configured for the
parameter must be identical.
One-bits in this parameter mean that the corresponding bits configured for the
parameter must be ignored.
Indicates packet redirection is to be applied to IP packet fragments only.
Usage
Block IP packets when the source and destination are of interest.