Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
IuPS Service Configuration Mode Commands
▀ relocation-complete-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
relocation-complete-timeout
This command specifies the maximum time for the SGSN to wait for a Relocation Completion from the core network.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the configuration to a 5 second wait time.
Time in seconds that the SGSN waits for relocation to be completed.
: Must be an integer from 1 to 60.
Default : 5 seconds.
Usage
Use this command to configure the number of seconds the SGSN will wait for a relocation to be completed.
This timeout needs to be set with sufficient time so that SRNS procedure aborts can be avoided if the peer
fails to respond in a timely fashion in the case of a hard handoff.
This timeout needs to be set with sufficient time so that SRNS procedure aborts can be avoided if the peer
fails to respond in a timely fashion in the case of a hard handoff.
Example
The following command sets the wait time for 10 seconds.
The following command sets the wait time for 10 seconds.