Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
NTP Configuration Mode Commands
▀ enable
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
enable
Enables the use of the network timing protocol for updating the system clock.
Product
All
Privilege
Security Administrator, Administrator
Syntax
[
]
Default: local
Specifies the context for which NTP is to be enabled.
Specifies the context for which NTP is to be enabled.
must refer to a previously configured context.
Usage
Set the NTP server to be used for the system. Only one NTP server may be active at any given time. If this
command were issued in a different context followed by the current context, the prior context‘s NTP server
would be disabled and the current context‘s NTP server would be used.
If any NTP server is enabled, the chassis system clock will be synchronized to the active NTP server which
covers all contexts for timing synchronization.
The use of a given context for NTP server assignment is to inherit the domain and IP routing options of the
configured context.
command were issued in a different context followed by the current context, the prior context‘s NTP server
would be disabled and the current context‘s NTP server would be used.
If any NTP server is enabled, the chassis system clock will be synchronized to the active NTP server which
covers all contexts for timing synchronization.
The use of a given context for NTP server assignment is to inherit the domain and IP routing options of the
configured context.
Example