Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
OSPF Configuration Mode Commands
area virtual-link authentication-key ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
area virtual-link authentication-key
This command configures the authentication password for the virtual link between an area that cannot be physically
connected to the network backbone and an area that is physically connected to the network backbone.
connected to the network backbone and an area that is physically connected to the network backbone.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
}
[
]
The IP address, in IPv4 dotted-decimal notation, of the transit area.
The identification number of the transit area. This must be an integer from 0 through 4294967295.
The router id, in dotted-decimal notation, of the ABR to be linked to.
Use this if you are pasting a previously encrypted authentication key into the CLI command.
The password to use for authentication.
is a string variable, from 1 through 16
alphanumeric characters, that denotes the authentication password. This variable is entered in clear text
format.
format.
Usage
Use this command to specify the authentication password for a virtual link between an area that is connected
to the network backbone and an area that cannot be connected to the network backbone.
to the network backbone and an area that cannot be connected to the network backbone.
Example
The following command creates an authentication password of
The following command creates an authentication password of
for a virtual link between the OSPF areas
defined by the IP address
and the IP address
:
area
virtual-link
authentication-key password