Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Rulebase Configuration Mode Commands
ip reassembly-timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip reassembly-timeout
This command configures how long to hold onto IP fragments for reassembly, while waiting for the complete packet to
arrive.
arrive.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Sets the timeout timer to 5000 milliseconds.
Specifies the user configured value to timeout timer to hold fragmented packets before reassembly.
is the duration, in milliseconds, and must be an integer from 100 through 30000.
Usage
Use this command to configure duration for timeout timer to hold IP fragmented packets before reassembly is
needed.
IP fragmented packet are retained, until either all fragmented packets have been received or the configured
timeout has expired for the oldest fragment. If all fragments have been received, a temporary complete packet
is reconstructed for analysis. Then all fragments are forwarded in order from first to last. If all fragments are
not received, the fragments will be forwarded without being passed through the protocol analyzers, except for
the IP analyzer.
needed.
IP fragmented packet are retained, until either all fragmented packets have been received or the configured
timeout has expired for the oldest fragment. If all fragments have been received, a temporary complete packet
is reconstructed for analysis. Then all fragments are forwarded in order from first to last. If all fragments are
not received, the fragments will be forwarded without being passed through the protocol analyzers, except for
the IP analyzer.
Example
The following command sets the timeout timer to
The following command sets the timeout timer to
milliseconds: