Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
APN Configuration Mode Commands
▀ ip address alloc-method
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ip address alloc-method
Configures the method by which this APN will obtain IP addresses for PDP contexts.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Default: Disabled
Configures the APN to assign an IP address received from a DHCP server.
Configures the APN to assign an IP address received from a DHCP server.
Important:
If this option is used, the system‘s DHCP parameters must be configured.
Default: Disabled
Configures the APN to forward DHCP packets received from the MS to a DHCP server.
Configures the APN to forward DHCP packets received from the MS to a DHCP server.
Important:
If this option is used, the system‘s DHCP parameters must be configured.
Default: Enabled
Configures the APN to allocate IP addresses from a pool configured in the destination context on the system.
Configures the APN to allocate IP addresses from a pool configured in the destination context on the system.
Important:
If this option is used, the name of the IP address pool from which to allocate addresses must be
configured using the ip address pool-name command. If no pool name is specified, the system will attempt to allocate
an address from any public pool configured in the destination context.
an address from any public pool configured in the destination context.
Default: Disabled
Disables the dynamic assignment of IP addresses to PDP contexts using this APN.
If a PDP context needing an IP address is received by an APN with this option enabled, it will be rejected
with a cause code of 220 (Unknown PDP address or PDP type).
Disables the dynamic assignment of IP addresses to PDP contexts using this APN.
If a PDP context needing an IP address is received by an APN with this option enabled, it will be rejected
with a cause code of 220 (Unknown PDP address or PDP type).
Default: Disabled