Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
SGSN ASP Configuration Mode Commands
end-point ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
end-point
This command defines or deletes the IP address and/or port number to be associated with the local SCTP end-point for
this ASP. At least one address needs to be configured before the end-point can be activated.
this ASP. At least one address needs to be configured before the end-point can be activated.
When using the
keyword, this command also activates the end-point once the address has been defined. Once
bound, it cannot be reconfigured until it is unbound with the
command.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Specifies the IP address and the context associated with the address for this end-point.
ip_address: must be defined using the standard IPv4 dotted decimal notation or the colon notation of IPv6.
ip_address: must be defined using the standard IPv4 dotted decimal notation or the colon notation of IPv6.
context_id: a string of 1 to 79 alphanumeric characters to identify the specific context associated
with the end-point address.
Activates (binds) the end-point.
Important:
Only use
after you have configured other parameters.
Identifies the M3UA‘s SCTP port associated with this end-point.
port_number: must be an integer fom 1 to 65535. Default is 2905.
port_number: must be an integer fom 1 to 65535. Default is 2905.
Removes the end-point configuration or deactivates the end-point.
Caution:
Entering this command will terminate all current subscriber sessions for associated peers.
Usage
Use this command to manage the ASP end-point. Once the ASP end-point is bound the end-point
configuration can not be changed until it is unbound.
configuration can not be changed until it is unbound.
Example
Activate the end-point with the following command:
Activate the end-point with the following command: