Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Channelized Port Configuration Mode Commands
▀ frame-relay
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
frame-relay
Configures the parameters for the Frame Relay connections for E1, DS1 and fractional E1 ports created with the
command. Frame
Important:
The
command must be configured prior to attempting configuration with the
command.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Identifies a specific path configuration, set with the
command in this configuration model.
must be an integer from 1 to 3.
Selects the pipe splitting for the connection.
DS1: Is associated with North American networks and would be the best choice to work with the SONET
framing selected with the
DS1: Is associated with North American networks and would be the best choice to work with the SONET
framing selected with the
configuration command. DS1 splits the path into 28 logical connections.
: Defines the number of logical connections supported via the DS1. The selection must be an
integer from 1 to 28.
E1: is associated with European networks and would be associated with the SDH framing selected with the
E1: is associated with European networks and would be associated with the SDH framing selected with the
configuration command. E1 splits the path into 21 logical connections.
: Defines the number of logical connections supported via the E1. The selection must be an
integer from 1 to 21.
Identifies one of the timeslots within a timeslot group configured with the
command for the E1, DS1
or fractional E1 port. Identifying one slot in a group means that all the slots in that group will have the Frame
Relay parameters configured in the same manner.
Relay parameters configured in the same manner.
Must be an integer from 1 to 31.
Selecting the interface type specifies signaling parameters for the DLCI, options include:
: Selects data circuit-terminating equipment -type signaling.
: Selects data terminal equipment -type signaling.
: Selects the network-to-network interface
Default: DTE for Release 8.0
Default: DCE for Release 8.1
Default: DCE for Release 8.1