Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
▀ router
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
router
This command enables the OSPF routing functionality and enters the OSPF Configuration mode. Refer to the OSPF
Configuration Mode Commands chapter for details on OSPF Configuration mode commands.
Configuration Mode Commands chapter for details on OSPF Configuration mode commands.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the specified routing support in the current context.
Enable OSPF routing in this context and enter OSPF Configuration mode.
Enable a BGP routing service for this context and assign it the specified AS number.
must be
an integer from 1 through 65535.
Important:
BGP routing is supported only for use with the HA.
Usage
Use this command to enable and configure OSPF and BGP routing in the current context.
Important:
You must obtain and install a valid OSPF or BGP-4 feature use license key to use OSPF and BGP
routing features. Refer to the System Administration and Configuration Guide for details on obtaining and installing
feature use license keys.
feature use license keys.
Example
The following command enables the OSPF routing functionality and enters the OSPF Configuration mode:
The following command enables the OSPF routing functionality and enters the OSPF Configuration mode:
The following command enables a BGP routing service with an AS number of 100, and enters the BGP configuration
mode:
mode: