Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
AAA Server Group Configuration Mode Commands
radius accounting interim ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
radius accounting interim
This command configures the volume of uplink and downlink volume octet counts that trigger RADIUS interim
accounting, and configures the time period between the sending of interim accounting records.
accounting, and configures the time period between the sending of interim accounting records.
Product
GGSN, PDSN, HA, HSGW
Privilege
Security Administrator, Administrator
Syntax
Disables RADIUS interim accounting.
Specifies the time interval, in seconds, between sending interim accounting records.
must be an
integer from 50 through 40,000,000.
: Specifies the downlink to uplink volume limit, in bytes, for RADIUS
Interim accounting.
must be an integer from 100,000 through 4,000,000,000.
: Specifies the total volume limit, in bytes, for RADIUS interim accounting.
must be
an integer from 100,000 through 4,000,000,000.
: Specifies the uplink to downlink volume limit, in bytes, for RADIUS
interim accounting.
must be an integer from 100,000 through 4,000,000,000.
Usage
Use this command to trigger RADIUS interim accounting based on the volume of uplink and downlink bytes
and/or to configure the time interval between the sending of interim accounting records.
and/or to configure the time interval between the sending of interim accounting records.
Example
The following command triggers RADIUS interim accounting when the total volume of uplink and downlink bytes
reaches
The following command triggers RADIUS interim accounting when the total volume of uplink and downlink bytes
reaches
:
The following command sets the interval between sending interim accounting records to 3 minutes (180 seconds):