Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Crypto Group Configuration Mode Commands
▀ switchover
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
switchover
Configures the fail-over properties for the crypto group as part of the Redundant IPSec Fail-Over feature.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the automatic switchover of tunnels. This applies to both primary-to-secondary and secondary-to-
primary switches.
primary switches.
Default: Enabled
Allows the automatic switchover of tunnels.
Allows the automatic switchover of tunnels.
Default: Disabled
Disables the automatic switchover of secondary tunnels to primary tunnels.
Disables the automatic switchover of secondary tunnels to primary tunnels.
Usage
This command configures the fail-over options for the Redundant IPSec Fail-over feature.
If the automatic fail-over options are disabled, tunneled traffic must be manually switched to the alternate
tunnel (or manually activated if no alternate tunnel is configured and available) using the following command
in the Exec Mode:
crypto-group group_name activate { primary | secondary }
For a definition of this command, see the crypto-group section of the Exec Mode Commands chapter of this
guide.
If the automatic fail-over options are disabled, tunneled traffic must be manually switched to the alternate
tunnel (or manually activated if no alternate tunnel is configured and available) using the following command
in the Exec Mode:
crypto-group group_name activate { primary | secondary }
For a definition of this command, see the crypto-group section of the Exec Mode Commands chapter of this
guide.
Example
The following command disables the automatic secondary-to-primary switchover:
The following command disables the automatic secondary-to-primary switchover: