Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Crypto Map IKEv2-IPv6 Configuration Mode Commands
payload ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
payload
Creates a new, or specifies an existing, crypto template payload and enters the Crypto Template Payload Configuration
Mode.
Mode.
Product
P-GW
Privilege
Administrator
Syntax
Specifies the name of a new or existing crypto template payload.
must be from 1 to 127 alpha and/or
numeric characters.
Filters IPSec IPv6 Child Security Association creation requests for subscriber calls using this payload.
Further filtering can be performed by applying the following:
Further filtering can be performed by applying the following:
Usage
Use this command to create a new or enter an existing crypto template payload. The payload mechanism is a
means of associating parameters for the Security Association (SA) being negotiated.
Two payloads are required: one each for MIP and IKEv2. The first payload is used for establishing the initial
Child SA Tunnel Inner Address (TIA) which will be torn down. The second payload is used for establishing
the remaining Child SAs. Note that if there is no second payload defined with home-address as the
means of associating parameters for the Security Association (SA) being negotiated.
Two payloads are required: one each for MIP and IKEv2. The first payload is used for establishing the initial
Child SA Tunnel Inner Address (TIA) which will be torn down. The second payload is used for establishing
the remaining Child SAs. Note that if there is no second payload defined with home-address as the
then no MIP call can be established, just a Simple IP call.
Currently, the only available match is for ChildSA, although other matches are planned for future releases.
Entering this command results in the following prompt:
[
Entering this command results in the following prompt:
[
]
(cfg-crypto-<
>-ikev2-tunnel-payload)#
Crypto Template IKEv2-IPv6 Payload Configuration Mode commands are defined in the Crypto Template
IKEv2-IPv6 Payload Configuration Mode Commands chapter.
IKEv2-IPv6 Payload Configuration Mode Commands chapter.
Example
The following command configures a crypto template payload called
The following command configures a crypto template payload called
and enters the Crypto Template
IKEv2-IPv6 Payload Configuration Mode: