Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
CSCF Security Configuration Mode Commands
threshold-rate ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
threshold-rate
Configures the rate per second at which the system must receive bad requests before it considers the requests a DoS
attack.
attack.
Important:
The system will ignore the configuration of this command unless the
command
has been enabled.
Product
SCM (P-CSCF, A-BG)
Privilege
Security Administrator, Administrator
Syntax
Default: 1
Specifies the rate per second that the system must receive bad requests to determine that it is under a DoS
attack.
Specifies the rate per second that the system must receive bad requests to determine that it is under a DoS
attack.
must be an integer from 1 to 1,000.
Sets /restores the default value assigned to the specified command.
Usage
Use this command to specify the threshold rate for bad requests. For example, if a malicious user sends bad
requests at a rate of 5 per second and this parameter is set to 10, the system will not consider itself under a
DoS attack.
requests at a rate of 5 per second and this parameter is set to 10, the system will not consider itself under a
DoS attack.
Example
The following command sets the threshold rate to bad requests per second:
The following command sets the threshold rate to bad requests per second: