Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
eGTP Service Configuration Mode Commands
interface-type ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
interface-type
Configures the interface type used by this service.
Product
MME, P-GW, S-GW
Privilege
Administrator
Syntax
: Specifies that the interface has the characteristics of an eGTP MME S11 reference point
to/from an S-GW.
: Specifies that the interface has the characteristics of an eGTP P-GW S5/S8
reference point from an S-GW. The interface assumes the characteristics of either a GTP-C (control Plane) or
GTP-U (user plane) reference point.
GTP-U (user plane) reference point.
: Specifies that the interface has the characteristics of an eGTP S-GW S4 reference point
to/from an SGSN.
: Specifies that the interface has the characteristics of an eGTP S-GW S5/S8
reference point to an eGTP P-GW. The interface assumes the characteristics of either a GTP-C (control
Plane) or GTP-U (user plane) reference point.
Plane) or GTP-U (user plane) reference point.
: Specifies that the interface has the characteristics of:
an eGTP-C S-GW S11 reference point from the MME.
an eGTP-U S-GW S1-U reference point from the eNodeB.
Usage
Use this command to specify the type of interface this service uses. By configuring this command, the
interface takes on the characteristics of the selected type.
interface takes on the characteristics of the selected type.
Example
The following command configures the interface bound to this service to maintain the characteristics of an eGTP-C S-
GW S11 reference point from an MME:
The following command configures the interface bound to this service to maintain the characteristics of an eGTP-C S-
GW S11 reference point from an MME: