Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Commands (A-C)
▀ card halt
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
card halt
This command halts a card. A card reboot must be issued to bring the card back into service after it is halted.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Indicates the slot number of the card of interest.
Over-rides any warnings to force the card to be halted.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Halt a card to stop the card for maintenance or emergency situations.
Caution:
Caution should be taken in using this command as halting a card which has no redundancy card
available may cause a service interruption and loss of active sessions.
Caution:
The
and
options should only be used concurrently by experienced users as
this will cause an immediate halt regardless of warnings and no confirmation from the user.
Important:
This command is not supported on all platforms.
Example
The following command temporarily stops the card in slot .
The following command temporarily stops the card in slot .
The following commands force the card to halt and indicate no confirmation is to take place, respectively.