Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Commands (D-S)
debug ip ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
debug ip
Enables/disables the debug options for IP debugging. If logging is enabled, results are sent to the logging system.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Indicates the IP debugging is to be disabled for the IP interfaces/function specified.
Specifies which IP interfaces/function to debug.
: indicates debug is to be enabled for the address resolution protocol.
: indicates debug is to be enabled for the IP interfaces.
: indicates debug is to be enabled for the route selection and updates.
Usage
The debug IP command is valuable when troubleshooting network problems between nodes. The debugging
is stopped by using the
is stopped by using the
keyword.
Caution:
Issuing this command could negatively impact system performance depending on system
configuration and/or loading.
Example
The following commands enable/disable debugging for ARP.
The following commands enable/disable debugging for ARP.
The following enables disables debugging for IP interfaces.
The following enables/disables debugging for routing.