Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Commands (D-S)
enable ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
enable
Allows the system to start making requests of a selected RADIUS server.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Specifies the type of RADIUS server to enable.
Identifies the RADIUS server by IP address.
is specified using the standard IPv4 or IPv6 dotted decimal notation.
Default: 1812 (authentication) 1813 (accounting)
Specifies the port number of the RADIUS server being enabled.
Specifies the port number of the RADIUS server being enabled.
must be the configured port number of the RADIUS server being enabled and must be 0 to 65535
numeric characters in length.
Default: default
Specifies the RADIUS group to which the server belongs. Use this option in the event that the RADIUS
server belongs to multiple groups and you only want to disable the server within the specific group.
Specifies the RADIUS group to which the server belongs. Use this option in the event that the RADIUS
server belongs to multiple groups and you only want to disable the server within the specific group.
must be the name of a configured RADIUS Server group and be 1 to 63 characters in length.
Usage
Use this command to allow the system to start making requests of a specific RADIUS server.
Example
The following command enables a RADIUS accounting server with an IP address of 1.2.3.4, the default accounting
server port number, and that resides in the ―Group5‖ server group:
The following command enables a RADIUS accounting server with an IP address of 1.2.3.4, the default accounting
server port number, and that resides in the ―Group5‖ server group: