Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Commands (D-S)
gtpv0 test echo ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
gtpv0 test echo
Tests the ability of a GGSN service to exchange GTPv0 echo request messages with the specified SGSN(s).
Product
GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Specifies the IP address of a Gn interface configured on the system.
must be expressed in dotted decimal notation.
Important:
The IP address of the system‘s Gn interface must be bound to a configured GGSN service prior to
executing this command.
Specifies that GTPv0 echo requests will be sent to all SGSNs that currently have sessions with the GGSN
service.
service.
Specifies that GTPv0 echo requests will be sent to a specific SGSN.
is the address of the SGSN to send the requests to and must be expressed in dotted decimal
notation.
Usage
This command tests the GGSN‘s ability to exchange GPRS Tunneling Protocol version 0 (GTPv0) packets
with the specified SGSNs which can be useful troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN service is configured.
Refer also to the gtpc test and gtpu test commands.
with the specified SGSNs which can be useful troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN service is configured.
Refer also to the gtpc test and gtpu test commands.
Example
The following command issues GTPv0 echo packets from a GGSN service bound to address 192.168.1.33 to an SGSN
with an address of 192.168.1.42:
The following command issues GTPv0 echo packets from a GGSN service bound to address 192.168.1.33 to an SGSN
with an address of 192.168.1.42:
The following displays a sample of this command‘s output.