Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (A-C)
▀ show cscf nat
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
show cscf nat
Displays the mapping created for each of the media streams present in an established dialog.
Product
SCM (P-CSCF, A-BG)
Privilege
Security Administrator, Administrator
Syntax
: Displays the UE/Network origins and destinations, including their IP addresses/port numbers and
associated contexts.
aor
aor
: Displays information for a specific AoR.
must be an existing AoR and be from 1 to 79 alpha
and/or numeric characters.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
Refer to Regulating a Command’s Output section of the Command Line Interface Overview chapter in the
Command Line Interface Reference for details on the usage of
output to must be specified.
Refer to Regulating a Command’s Output section of the Command Line Interface Overview chapter in the
Command Line Interface Reference for details on the usage of
and
.
Usage
Use this command to display the status of configured Network Address Translation (NAT) support.
Example
The following command displays the status of the mapping created for each of the media streams present on this system:
The following command displays the status of the mapping created for each of the media streams present on this system:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.