Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Show Commands (H-L)
▀ show ip bgp
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
show ip bgp
Disp[lays BGP information for the current context.
Product
HA
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Specify the IP address and netmask bits for the network for which information should be displayed.
is an IPv4 address in dotted-decimal notation and
is the number of subnet bits,
representing a subnet mask in shorthand. These must be entered in the dotted-decimal notation/subnet bits
format (1.1.1.1/24).
format (1.1.1.1/24).
Display debug flags that are enabled.
Display routes that match the specified filter list.
Display information for all neighbors or a specified neighbor. i
is an IPv4 address in dotted-
decimal notation
Display routes that match the specified route-map.
Display all VPNv4 routing data, routing data for a VRF, or a route-distinguisher.
: displays all VPN routing information. If this is specified, the information displayed is gathered
from all the VRF's known to BGP and displayed. It could contain the list of neighbors, the list of
networks, or a particular network
networks, or a particular network
: displays the network for which information in the BGP routing table.
: shows neighbor information for the all the vrfs including the default vrf or for the VRF
with a matching RD value.
: shows summary information of neighbors for all the vrfs including the default vrf or for the
VRF with a matching RD value.