Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Firewall Ruledef Configuration Mode Commands
ip src-address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip src-address
This command configures an access/firewall ruledef to analyze user traffic based on IP source address.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes previously configured IP destination address ruledef.
: Specifies how to logically match the IP source address.
must be one of the
following:
: does not equal
: less than or equals
: equals
: greater than or equals
: Specifies the IP address of source node for incoming traffic in IPv4 or IPv6 standard
notation.
must be the IP address in dotted decimal notation for IPv4, or in colon notation for
IPv6.
: Specifies the IP address of source node for incoming traffic in IPv4 or IPv6 standard
notation with subnet mask bit.
must be the IP address in dotted decimal notation for
IPv4, or in colon notation for IPv6 with subnet mask bit. The mask bit is a numeric value which is the number
of bits in the subnet mask.
of bits in the subnet mask.
: Specifies the range criteria:
: Not in the range of
: In the range of
: Specifies the host pool name.
must be a string of 1 through 63
characters in length.
Usage
Use this command to specify an access/firewall ruledef to analyze user traffic based on the IP source address.
Example
The following command creates IP ruledef for analyzing user traffic using an IP source address of
The following command creates IP ruledef for analyzing user traffic using an IP source address of
: