Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GGSN Service Configuration Mode Commands
authorize-with-hss ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
authorize-with-hss
This command enables/disables subscriber session authorization with HSS over S6b Diameter interface. This feature is
required to support the interworking of GGSN with P-GW and HA.
required to support the interworking of GGSN with P-GW and HA.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Usage
Use this command to enable/disable the authorization support for subscriber over S6b interface which is used
between GGSN and the 3GPP AAA to exchange the information related to charging, P-CSCF discovery, etc.
By use of this feature allows the GGSN service to interact with HSS over S6b interface through Diameter
configuration which is already configured on the system.
between GGSN and the 3GPP AAA to exchange the information related to charging, P-CSCF discovery, etc.
By use of this feature allows the GGSN service to interact with HSS over S6b interface through Diameter
configuration which is already configured on the system.
Important:
Dimeter configuration must be available before enabling this command. For more information of
Diameter interface configuration, refer Diameter Endpoint Configuration Mode Commands chapter..
Important:
This command is a license-enabled feature.
Example
The following command enables the subscriber authorization with HSS over S6b Diameter interface to provide session
interoperability between GGSN and PGW and HA in this GGSN service:
The following command enables the subscriber authorization with HSS over S6b Diameter interface to provide session
interoperability between GGSN and PGW and HA in this GGSN service: