Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ aaa large-configuration
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
aaa large-configuration
This command enables/disables the system to accept a large number of RADIUS configurations to be defined and
stored.
stored.
Important:
For this command to take affect, after entering the command the configuration must be saved and
reloaded.
When aaa large-configuration is disabled, the following restrictions are in place:
Only one (1) NAS IP address can be defined per context with the
command.
The RADIUS attribute nas-ip-address can only be configured if the RADIUS group is default.
Only 320 RADIUS servers can be configured system-wide.
Only 64 RADIUS groups can be configured system-wide.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables AAA large configuration support.
Usage
When aaa large-configuration is enabled, the system provides the ability to configure multiple NAS IP
addresses in a single context to used with different radius groups. As well, the command allows support for
up to 1600 RADIUS server configurations and for a PDSN a maximum of 400 or for a GGSN a maximum of
800 RADIUS server group configurations system-wide.
addresses in a single context to used with different radius groups. As well, the command allows support for
up to 1600 RADIUS server configurations and for a PDSN a maximum of 400 or for a GGSN a maximum of
800 RADIUS server group configurations system-wide.
Example
To enable the definition of a large number of RADIUS configurations, enter the following commands in the following
order:
In APN Configuration mode, use the aaa group command and enter:
To enable the definition of a large number of RADIUS configurations, enter the following commands in the following
order:
In APN Configuration mode, use the aaa group command and enter:
In Global Configuration mode, enter