Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
boot networkconfig ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
boot networkconfig
Configures the networking parameters for the Switch Processor I/O card network interfaces to use when obtaining a
software image from an external network server during the system boot process.
software image from an external network server during the system boot process.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the network configuration information from the boot.sys file.
Indicates that a Dynamic Host Control Protocol (DHCP) server is used for communicating with the external
network server.
network server.
: provides static IP address fallback network option when a DHCP server is
unavailable.
: specifies a fixed network IP address for the external network server that hosts the software image.
[
]: the IP address to use for the SPIO in slot 24 and
optionally the SPIO in slot 25 for network booting.
must be specified using the standard IPv4
dotted-decimal notation.
: the network mask to use in conjunction with the IP address(es) specified for network
booting.
must be specified using the standard IPv4 dotted-decimal notation.
: the IP address of a network gateway to use in conjunction with the IP address(es)
specified for network booting.
must be specified using the standard IPv4 dotted-decimal
notation.
Important:
If
is not specified, then the network server must be on the same LAN as the system.
Since both SPIOs must be in the same network, the netmask and gateway settings are shared.
Usage