Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ sccp-network
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
sccp-network
This command creates or removes a Signaling Connection Control Part (SCCP) network instance which is used to
define the SS7 end-to-end routing in a UMTS network. As well, this command enters the SCCP network configuration
mode. The SGSN supports up to 12 SCCP network instances at one time.
define the SS7 end-to-end routing in a UMTS network. As well, this command enters the SCCP network configuration
mode. The SGSN supports up to 12 SCCP network instances at one time.
Product
SGSN, HNB-GW
Privilege
Security Administrator, Administrator
Syntax
Remove the SCCP network configuration with the specified index number from the system configuration.
This number identifies a specific SCCP network configuration.
must be an integer from 1 through 12.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to create or modify an SCCP network and enter the SCCP network configuration mode.
The SCCP network is not a standard SS7 or UMTS concept - this concept is specific to this platform.
For details about the commands and parameters needed to create and edit the SCCP Network configuration,
check the SCCP Network Configuration Mode chapter.
The SCCP network is not a standard SS7 or UMTS concept - this concept is specific to this platform.
For details about the commands and parameters needed to create and edit the SCCP Network configuration,
check the SCCP Network Configuration Mode chapter.
Example
The following command creates an SCCP network with the index number of :
The following command creates an SCCP network with the index number of :
The following command creates an SCCP network with the index number of to associate with HNB-GW service for
HNB access network users without any prompt.:
HNB access network users without any prompt.: