Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold aaa-acct-failure-rate
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold aaa-acct-failure-rate
Configures accounting failure rate thresholds for the system.
Product
PDSN, GGSN, HA, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Default: 1
The high threshold percent of accounting failures that must be met or exceeded within the polling interval to
generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
The high threshold percent of accounting failures that must be met or exceeded within the polling interval to
generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
Default: 1
The low threshold percent of accounting failures that maintains a previously generated alarm condition. If the
percentage of failures falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
low_thresh can be configured to any integer value between 0 and 100.
The low threshold percent of accounting failures that maintains a previously generated alarm condition. If the
percentage of failures falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
low_thresh can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Accounting failure rate thresholds generate alerts or alarms based on the percentage of AAA accounting
message requests that failed during the specified polling interval. Accounting requests are counted for all
AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failure rates based on the following rules:
message requests that failed during the specified polling interval. Accounting requests are counted for all
AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failure rates based on the following rules:
Enter condition: Actual failure percentage ³ High Threshold
Clear condition: Actual failure percentage < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a AAA accounting failure rate high threshold percentage of 30 and a low threshold
percentage of 10 for an system using the Alarm thresholding model:
The following command configures a AAA accounting failure rate high threshold percentage of 30 and a low threshold
percentage of 10 for an system using the Alarm thresholding model: