Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold call-setup-failure
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold call-setup-failure
Configures call setup failure thresholds for the system.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 0
The high threshold number of call setup failures experienced by the system that must be met or exceeded
within the polling interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
The high threshold number of call setup failures experienced by the system that must be met or exceeded
within the polling interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
Default: 0
The low threshold number of call setup failures experienced by the system that maintains a previously
generated alarm condition. If the number of setup failures falls beneath the low threshold within the polling
interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
The low threshold number of call setup failures experienced by the system that maintains a previously
generated alarm condition. If the number of setup failures falls beneath the low threshold within the polling
interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Call setup failure thresholds generate alerts or alarms based on the total number of call setup failures
experienced by the system during the specified polling interval.
Alerts or alarms are triggered for call setup failures based on the following rules:
experienced by the system during the specified polling interval.
Alerts or alarms are triggered for call setup failures based on the following rules:
Enter condition: Actual number of call setup failures ³ High Threshold
Clear condition: Actual number of call setup failures < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a high threshold count of 100 call setup failures and a low threshold of 80 for an
system using the Alarm thresholding model:
The following command configures a high threshold count of 100 call setup failures and a low threshold of 80 for an
system using the Alarm thresholding model: