Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold license
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold license
Configures thresholds for session license utilization for the system.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 10
The low threshold session license utilization percentage that must be met or exceeded within the polling
interval to generate an alert or alarm.
The low threshold session license utilization percentage that must be met or exceeded within the polling
interval to generate an alert or alarm.
can be configured to any integer value between 0 and 100.
Default: 10
The high threshold session license utilization percentage that maintains a previously generated alarm
condition. If the utilization percentage rises above the high threshold within the polling interval, a clear alarm
will be generated.
The high threshold session license utilization percentage that maintains a previously generated alarm
condition. If the utilization percentage rises above the high threshold within the polling interval, a clear alarm
will be generated.
can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the low threshold.
Usage
Session license utilization thresholds generate alerts or alarms based on the utilization percentage of all
session capacity licenses during the specified polling interval.
As described in Chapter 7 of the Administration and Configuration Guide, the system uses session capacity
license to dictate the maximum number of simultaneous sessions that can be supported. There are multiple
session types that require licenses (i.e. Simple IP, Mobile IP, L2TP, etc.). Although, a single threshold is
configured for all session types, alerts or alarms can be generated for each type.
Alerts or alarms are triggered for session license utilization based on the following rules:
session capacity licenses during the specified polling interval.
As described in Chapter 7 of the Administration and Configuration Guide, the system uses session capacity
license to dictate the maximum number of simultaneous sessions that can be supported. There are multiple
session types that require licenses (i.e. Simple IP, Mobile IP, L2TP, etc.). Although, a single threshold is
configured for all session types, alerts or alarms can be generated for each type.
Alerts or alarms are triggered for session license utilization based on the following rules:
Enter condition: Actual session license utilization percentage per session type £ Low Threshold
Clear condition: Actual session license utilization percentage per session type > High Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example