Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold mgmt-cpu-utilization
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold mgmt-cpu-utilization
Configures the thresholds for CPU utilization.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 0
The high threshold CPU utilization percentage that must be met or exceeded within the polling interval to
generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
The high threshold CPU utilization percentage that must be met or exceeded within the polling interval to
generate an alert or alarm.
high_thresh can be configured to any integer value between 0 and 100.
The low threshold CPU utilization percentage that maintains a previously generated alarm condition. If the
utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
low_thresh can be configured to any integer value between 0 and 100.
utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
low_thresh can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
CPU utilization thresholds generate alerts or alarms based on the utilization percentage of each SMC CPU
during the specified polling interval. Although, a single threshold is configured for both SMC CPUs, separate
alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for SMC CPU utilization based on the following rules:
during the specified polling interval. Although, a single threshold is configured for both SMC CPUs, separate
alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for SMC CPU utilization based on the following rules:
Enter condition: Average measured CPU utilization for last 5 minutes ³ High Threshold
Clear condition: Average measured CPU utilization for last 5 minutes < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Important:
This command is not supported on all platforms.
Example