Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold poll dcca-protocol-error
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold poll dcca-protocol-error
This command configures the polling interval for DCCA Protocol Error threshold.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: 900 seconds
Default: 900 seconds
Specifies the polling interval for DCCA Protocol Error threshold, in seconds.
must be an integer value from 60 through 60000.
Usage
Use this the polling interval for DCCA Protocol Error threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling
interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
and other threshold commands for additional information on the
system‘s support for thresholding in this chapter.
Example
The following command configures the polling interval to 600 seconds for the DCCA protocol error threshold:
The following command configures the polling interval to 600 seconds for the DCCA protocol error threshold: