Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold poll mme-auth-failure ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
threshold poll mme-auth-failure
This command configures the polling interval to count the MME Authentication Failure messages across all MME
services in the system.
services in the system.
Product
MME
Privilege
Security Administrator, Administrator
Syntax
Restores the specified poll interval value to its default value of 900 seconds.
Default: 900 seconds.
Specifies the amount of time that comprises the polling interval for threshold to count the MME
Authentication Failure messages across all MME services in the system.
Specifies the amount of time that comprises the polling interval for threshold to count the MME
Authentication Failure messages across all MME services in the system.
is measured in seconds and can be configured to any integer value from 30 to 60000 in multiple of 30.
Usage
Use this command to configure the polling interval to count the MME Auth Failure messages across all MME
services in the system to generate threshold value.
services in the system to generate threshold value.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling
interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
and other threshold commands for additional
information on the system‘s support for thresholds in this chapter.
Example
The following command configures the polling interval of
The following command configures the polling interval of
seconds to count the MME Auth Failure messages for
threshold limit: