Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Gs Service Configuration Mode Commands
▀ vlr
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
vlr
This command defines a VLR configuration for use with this Gs service.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured VLR from the Gs service.
Specifies the name of the VLR to configure in this Gs mode with ISDN number.
must be an alpha and/or numeric string of 1 to 63 characters.
Specifies the VLR number to configure with this command.
The ISDN number for the target VLR. Value must be defined according to the E.164
numbering plan and must be a numeric string of 1 to 15 digits.
Specifies the subsystem number to configure with this VLR to use BSSAP+.
Must be an integer from 1 through 255. Default value is 252.
Specifies SS7 address of VLR in point code value to this configured VLR name.
Must be in SS7 point code dotted-decimal ###.###.### format or decimal ######## format.
Usage
Use this command to define VLR configuration instances to be associated with the Gs service.
A maximum of 32 VLRs can be configured per Gs service.
A maximum of 32 VLRs can be configured per Gs service.
Example
Following command configures the VLR named
Following command configures the VLR named
with an ISDN number
, a subsystem number
of
, and a point code value of
: