Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GTPP Server Group Configuration Mode Commands
▀ gtpp server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
gtpp server
Configures the charging gateway function (CGF) accounting server(s) with in GTPP server group that the system is to
communicate with.
communicate with.
Product
GGSN, SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes a previously configured CGF.
Specifies the IP address of the CGF in dotted decimal notation for IPv4 or colon notation for IPv6.
Default: 256
Specifies the maximum number of outstanding or unacknowledged GTPP packets (from any one AAA
Manager task) allowed for this CGF before the system begins buffering the packets.
Specifies the maximum number of outstanding or unacknowledged GTPP packets (from any one AAA
Manager task) allowed for this CGF before the system begins buffering the packets.
can be configured to any integer value from 1 to 256.
Default:1000
Specifies the relative priority of this CGF. When multiple CGFs are configured, the priority is used to
determine which CGF server to send accounting data to.
Specifies the relative priority of this CGF. When multiple CGFs are configured, the priority is used to
determine which CGF server to send accounting data to.
can be configured to any integer value from 1 to 1000. When configuring two or more servers
with the same priority you will be asked to confirm that you want to do this. If you use the
option, you are not asked for confirmation and multiple servers could be assigned the same priority.
Default: 3386
Specifies the UDP port over which the GGSN communicates with the CGF.
Specifies the UDP port over which the GGSN communicates with the CGF.
can be configured to any
integer value between 1 and 65535.
Default: Disable.
This optional keyword allows operator to enable/disable GGSN to send Node Alive Request to GTPP Server
(i.e. CGF). This configuration can be done per GTPP Server basis.
This optional keyword allows operator to enable/disable GGSN to send Node Alive Request to GTPP Server
(i.e. CGF). This configuration can be done per GTPP Server basis.