Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
GTP-U Service Configuration Mode Commands
▀ bind
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
bind
Configures the IP address to use for GTP-U data packets.
Product
GGSN, P-GW, S-GW
Privilege
Administrator
Syntax
removes a configured IP address from this service.
Binds the service to an interface with an IPv4 address, IPv6 address or both.
: Binds this service to the
IPv4 address of a configured interface. Optionally, bind the service to a configured interface with an IPv6
address.
address.
must be entered as a standard IPv4 address in dotted decimal notation.
must be entered as a standard IPv6 address in colon-separated notation.
: Binds this service to the
IPv6 address of a configured interface. Optionally, bind the service to a configured interface with an IPv4
address.
address.
must be entered as a standard IPv6 address in colon-separated notation.
must be entered as a standard IPv4 address in dotted decimal notation.
Usage
Use this command to bind the service to an interface for sending/receiving GTP-U packets.
Example
The following command configures the IPv4 address for this GTP-U service as
The following command configures the IPv4 address for this GTP-U service as
: