Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
HA Service Configuration Mode Commands
▀ gre
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
gre
Configures Generic Routing Encapsulation (GRE) parameters.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
{
|
|
|
{
|
} |
}
Disables the specified functionality.
Default: disabled
Enables the introduction of the checksum field in outgoing GRE packets.
Enables the introduction of the checksum field in outgoing GRE packets.
Default: disabled
Enables verification of the GRE checksum (if present) in incoming GRE packets.
Enables verification of the GRE checksum (if present) in incoming GRE packets.
Default: 100
Configures maximum number of milliseconds to wait before processing reordered out-of-sequence GRE
packets.
Configures maximum number of milliseconds to wait before processing reordered out-of-sequence GRE
packets.
must be an integer from 0 through 5000.
Default: none
Configures how incoming out-of-sequence GRE packets should be handled.
Configures how incoming out-of-sequence GRE packets should be handled.
: Disables reordering of incoming out-of-sequence GRE packets.
: Enables reordering of incoming out-of-sequence GRE packets.
Default: Disabled
Enables the insertion of sequence numbers into the GRE packets.
Enables the insertion of sequence numbers into the GRE packets.
Usage
Use this command to configure how the HA service handles GRE packets.
Example
To set maximum number of milliseconds to wait before processing reordered out-of-sequence GRE packets to 500
milliseconds, enter the following command:
To set maximum number of milliseconds to wait before processing reordered out-of-sequence GRE packets to 500
milliseconds, enter the following command: